Step by step instructions for how to reset the Toyota Prius maintenance light

Resetting the maintenance light on your Toyota Prius is very easy and straightforward. Here are steps that you can Once you know how to reset the maintenance light, you can turn off the indicator. To get started, hold down the power button and hold down the odometer button. Continue to hold these two buttons until the maintenance required icon appears and the odometer shows the desired reading.

follow to reset the maintenance light on your Prius.

The first step

is to turn off the engine of the car. If the light comes back on, wait a few minutes, then turn off the ignition and repeat the process.

The second step

is to press the power button on the dash. The switch on the left side will reset the maintenance light. Now turn off the ignition and check whether the light is back on. After the maintenance light goes off, you will see the resetting message on the dashboard.

The third step

is to press the “Power” button on the Toyota Prius. After you have pressed the power button, use the Up and Down arrows to select the Gear icon and then go to Vehicle Settings. Then press the Maintenance System option and press OK. The light should now be off. The last step is to turn on the ignition again. It should take about five minutes to complete this process.

To reset the maintenance light on your Toyota Prius, the first step is to turn off the ignition. To do this, you must be parked. Next, you should press the brake button and then the start button to navigate the dashboard. Once you have done this, push the gear icon. Then, select the arrow navigation buttons to enter the settings menu. After that, click OK to continue, and then choose OIL MAINTENANCE.

The next step

is to press the ODO button on the dashboard. While pressing the odometer, press and hold the brake pedal until the maintenance light flashes. Once it stops flashing, release the odometer button and wait for the car to restart. Then, repeat the procedure. Once the odometer has reset, you should see the mileage return to normal.

The next step is to press the power button twice to reset the maintenance light on your Toyota Prius. Then, you must release the ODO button. Then, you must press the power button again to stop the maintenance light. The maintenance light will be turned off if the odometer is running smoothly. In addition to the ODO, the power button is essential in turning off the maintenance light on the Toyota Prius.

The maintenance light is a warning signal that flashes on your dashboard, and there are a few ways to reset it. The first way is to remove the battery. This will reset the internal computer. After that, you can turn off the oil indicator. After removing the battery, turn off the ignition and the maintenance light should go away. To do this, you’ll need to press the odometer button and hold it down for a few seconds.

The next step is to press the KpH button and hold it for two seconds. Then, press the MPH button and hold it for three seconds. Then, press the up and down arrows. From here, select the Maintenance System. Then, press the “Power” button. The maintenance light should turn off after confirming that it is time for an oil change.

The maintenance light on your Toyota Prius indicates when it is time for an oil change. To reset it, follow these simple steps. To get started, first, make sure your car is switched on. Then, press the “Power” button. This will turn on the hybrid system. Then, press the Left and Right arrows to choose Vehicle Settings. Then, press the “Service” icon. Once you’ve selected your preferred settings, simply click on the maintenance light again.

After turning on the ignition, press the power button to turn the light back on. You can then go to the dashboard and press the odometer reset button. The screen should display the MAINT REQD indicator as it resets. Remember to hold down the center button during the process and make sure the digital odometer is showing the correct mileage. If the maintenance light comes back on, you can simply restart the car again.

Conclusion

Now, you’re ready to turn off the car and reset the maintenance light on your Toyota Prius. By pressing the power button twice, you’ll be able to reset the odometer. To do this, simply hold the brake while holding down the odometer. You’ll see that it will reset the maintenance reminder. When the light flashes, you’ve successfully removed the maintenance light.

The next step in resetting the maintenance light on a Toyota Prius is to enter the vehicle’s maintenance schedule. Once you’ve complied with this step, the maintenance light on your Prius will be back on. This is the same procedure for any Toyota. Just make sure to turn off the engine and then turn it off again. This will enable you to change the oil yourself.

Still Have Problem check-out those videos they might be helpful

Sharing Is Caring:

Leave a Comment